NOLAN N103 N COM OUTLAW HELMET FLAT BLACK L LARGE    US $218.88

NEW NOLAN N 103 N COM Motorcycle Helmet Gloss Black L M    US $399.95

NOLAN N103 N COM MOTORRAD MODULAR HELMET    US $270.99

Nolan N103 Modular N Com Ready Helmet Arctic Gray XXL 2XL    US $200.00

Nolan Modular Motorcycle Helmet: Silver N103 N-Com

The silver Nolan N103 N-Com modular — or flip-up — helmet was the newest version of modular motorcycle helmet to come out of the Italian lid-maker back in 2008. This Nolan motorcycle helmet looks starkly different than the Nolan N-102 N-Com flip-up helmet, sporting a more futuristic Star Wars-like appearance with sharp angles and wedges.

Another readily apparent difference is that this dual visor modular motorcycle helmet from Nolan utilizes an internal sunshield, a design feature that has gained popularity since the dual visor Nolan N-102 came out with an externally mounted sunshield a couple of years earlier. The feature-packed silver Nolan N103 N-Com modular helmet offers a lot more than just an internal sunshield, however.

This Nolan flip-up helmet features an articulated chin bar and outer shell of durable, impact-resistant polycarbonate. The fully-sealed articulated chin bar secures with a confidence-inspiring double stainless-steel latching mechanism. Nolan's dual-action Centromatic chin bar release system allows one-handed operation to lift and close the modular chin bar.

The front of the chin bar features large molded-in left- and right-side wedges within which are wide chin bar intake vents, operated by a large black glove-friendly slider at the front top center of the the chin bar. Up top, the outer shell features a built-in combination air intake and spoiler, with large twin air intake scoops at the front and exhaust grid at the rear. The top vents are also controlled by a large black glove-friendly slider, located on top of the helmet.

The exterior motorcycle helmet face shield that comes with this Nolan modular motorcycle helmet is a clear optical-quality, anti-scratch Lexan Nolan Helmet face shield that offers UV400 protection against harmful UV rays. That means reduced eye strain, fatigue and UV damage. To combat fogging, the Nolan helmet shield accepts a pinlock antifog insert, which is included.

The multi-position flip-up shield pivot mechanisms feature instant push-button face shield release to make shield changes painless. The shield closes against upper and lower black rubber strips that form lips to prevent air leaks.

Inside this dual visor modular motorcycle helmet is a short dark aviation-style retractable shield, what Nolan has dubbed a Solar Tech sunshield. A slider on the left side of the helmet controls the sunshield, which is as thick as a regular motorcycle helmet face shield and provides effective eye protection without the clear shield.

The silver Nolan N103 N-Com modular motorcycle helmet is set up for the Nolan N Com communication system and ready for cable or Bluetooth connection to phone, MP3 player, or intercom. Another extremely comfortable and convenient feature is the fully removable and washable Clima-Comfort interior comfort liner and chin pad kit on snaps. The sanitized anti-microbial hypoallergenic interior components snap on and off quickly for washing.

Cheek pads for this modular motorcycle helmet from Nolan are available in five thickness sizes for a more custom fit. The Microlock adjustable quick-release chin-strap retention system includes velour chin-strap padding for added comfort. A removable breath guard and chin curtain complete the package. The Nolan N103 N-Com modular helmet is available in sizes X-Small to 2X-Large and retails for $395.99.

Click to see other Nolan N103 Helmets currently for sale

Click to see Nolan N103 Shields currently for sale

Nolan Modular Motorcycle Helmet: Silver N103 N-Com is a post from: Modular Motorcycle Helmets

KBC FFR Modular Helmet Gunmetal XXSmall 766301XXS    US $19.99

NEW KBC RATCHET SET FFR TK8    US $11.99

KBC FFR Modular Graphics Helmet Retro Black Silver    US $149.99

KBC FFR Modular Helmet Black XSmall 766300XS    US $39.99

Modular Motorcycle Helmet: The Black KBC FFR Helmet

There are many black modular motorcycle helmets out there, and one worth looking at is the black KBC FFR helmet. This DOT approved motorcycle helmet is "the most technically advanced, feature loaded helmet from KBC." Totally 3D engineered from the very beginning by an international design team, the black KBC FFR helmet is a well-designed modular — or flip-up — motorcycle helmet that is both stylish and comfortable with sturdy construction for riding protection.

The FFR utilizes a one-piece injection-molded outer shell and pivoting chin bar made of a polycarbonate alloy that is lightweight yet impact absorbent and penetration resistant. The flashy outer shell features a combination of curvilinear and angular sculpture elements that give it a kind of Star Wars look.

Particularly eye-catching is the wrap-around recess on the bottom of the flip-up chin bar, which uses a single-button opening system for one-handed lifting and closing of the modular front. A magnesium and metal locking system ensures high-level quality and security.

The FFR modular motorcycle helmet model is the first KBC helmet to feature a totally new fitment platform for ultimate wearer comfort and an internal comfort lining design for added comfort and noise reduction. The dual-textured design utilizes grey perforated microfiber nylon that lines the bottom, around the cheek padding and the crown to improve air circulation and comfort.

The remainder of the interior is covered in black plush brushed nylon. The sweat-resistant lining helps prevent clamminess on hotter days. Your head will be happy to be inside this helmet.

The FFR modular motorcycle helmet also features a new controllabe air ventilation and cooling system to allow tailored airflow inside the helmet. Single crown and chin bar vents provide air intake while recessed side chin bar vortex exhaust vents pull hot stale air and moisture out of the helmet and away from the face shield area to prevent fogging. Exhaust ports at both the mid-rear and bottom rear increases air circulation to allow all-around ventilation and keep the wearer comfortable at all times.

The FFR modular helmet from KBC comes standard with a clear face shield to cover its wide eyeport, which ensures a wide field of vision. The 2mm molded anti-scratch, anti-fog face shield is mounted via multiposition flip-up ratcheting mechanisms that incorporate a quick removal shield system for no-tools-need swap outs. Wrap-around black flexible rubber lines the eye port and creates a good shield seal against the inner face shield surface to help minimize noise and keep water out.

Clear KBC Helmet replacement shields are available, as are a small assortment of smoke and tinted shields that offer an easy way to upgrade the helmet for a snazzier look. Optional smoked KBC Helmet replacement shields include light smoke and dark smoke. Tinted KBC Helmet replacement shield choices are yellow and blue. There is also a mirrored KBC Helmet face shield available for the FFR.

The black KBC FFR helmet is a full-featured modular motorcycle helmet, multi-functional for sport touring, cruising, high speed or just around town riding. This DOT approved motorcycle helmet offers lightweight, plush interior and effective venting plus effortless on and off compared to conventional full-face motorcycle helmets. It's an exceptionally functional modular motorcycle helmet that is stylish and comfortable.

Click to see other KBC FFR Helmets currently for sale

Click to see KBC FFR Shields currently for sale

Modular Motorcycle Helmet: The Black KBC FFR Helmet is a post from: Modular Motorcycle Helmets

Zox Hi Quest Flash Black Silver Helmet XSmall 8654231    US $26.99

Zox Hi Quest Wildflower Red Helmet XSmall 8654221    US $26.99

Zox Hi Quest Flow Silver Street Helmet XXSmall 8655120    US $26.99

Zox Hi Quest Wildflower Red XXSmall 8654220    US $26.99

Zox Modular Motorcycle Helmet: Red Hi Quest R Flow

The red Flow Zox Hi Quest R helmet was one of the factory custom painted Zox modular motorcycle helmets with four-way venting to debut in 2008, offering a contemporary chic look by way of a black painted base finish combined with bold, simple tri-color light silver/white/red custom motorcycle helmet graphics.

Aside from the mild-mannered exterior, this Zox motorcycle helmet is engineered from the inside out for superior fit and riding comfort, all for a price that isn't on the moon. The red Flow Zox Hi Quest R helmet also has several features that make it a modular — or flip-up — motorcycle helmet that is a great value for the money.

This DOT approved modular motorcycle helmet is built to survive hard wear. Its outer shell and modular faceplate are each single pieces, injection-molded from a thermo alloy resin, specially modified for toughness and to absorb impacts and resist penetration. Application of aerodynamic and aerotech technology in the Zox helmet design reduces noise and turbulence.

The outer shell and lift-up chin bar features stylish molded-in side speed-line air recesses as aerodynamically effective styling elements that help enhance balance and reduce wind drag. A small top dorsal add-on spoiler reduces lift and drag coefficients, thus diminishing rider fatigue.

Air intake for the controllable four-way cooling and ventilation system comes from two forehead vents with large chrome slide controls and a multiport chin vent. Air exits through ports in the small rear spoiler and dual-port side Venturi chin vents, providing full front-to-back airflow that flushes heat and humidity from inside this modular helmet.

Mounted at the the forward end of the side air recesses, the Venturi chin vent ports are vertically stacked and smoothly integrated, to the benefit of looks. The large forehead vent controls allow for easier gloved hand operation to control airflow.

The Zox helmet face shield that is included with this modular motorcycle helmet is a clear, optically-correct injection-molded polycarbonate flip-up ratcheting unit that both provides shatter-resistant face and eye protection and ensures a clear, crisp image in every direction.

For better view of the road in all conditions, the inside of the Zox helmet face shield is anti-fog treated to protect against extreme changes in weather or temperature. Black rubber window trim wraps around the large eyeport and fits against the face shield for a tight fit, less face shield noise.

An ergonomically engineered interior designed for riding comfort and safety makes this Zox modular helmet easy to wear - secure, balanced fit without wobble. Zox wraps the one-piece thermoplastic outer shell around a contoured-to-fit one-piece expanded polystyrene foam inner shell designed to reduce impacts, improve comfort and contribute to the firm, no-bounce fit. It is that protective combination that earns the helmet DOT approved motorcycle helmet certification.

The removable, washable interior head comfort liner and cheek pads use soft, wicking Coolmax fabric lining that works with the flow-through ventilation system to keep perspiration under control on sweltering summer days.

With the red Flow Zox Hi Quest R helmet, one gets a factory custom painted modular motorcycle helmet with a stylish, distinctive character with the ability and toughness to meet or exceed DOT motorcycle helmet safety standards. A relatively cheap motorcycle helmet, it's a great value.

It's a modular motorcycle helmet that flows a lot of air, offers a Coolmax moisture-wicking interior that keeps a rider cool and dry, and it delivers the effortless on/off of an open-face motorcycle helmet plus the weather and wind protection of a full-face motorcycle helmet.

Click to see other Zox Hi Quest R Helmets currently for sale

Click to see Zox Hi Quest Shields currently for sale

Zox Modular Motorcycle Helmet: Red Hi Quest R Flow is a post from: Modular Motorcycle Helmets

KBC FFR Modular Helmet Gunmetal XXSmall 766301XXS    US $19.99

NEW KBC RATCHET SET FFR TK8    US $11.99

KBC FFR Modular Graphics Helmet Retro Black Silver    US $149.99

KBC FFR Modular Helmet Black XSmall 766300XS    US $39.99

KBC FFR Modular Motorcycle Helmet: The Silver/Gunmetal Infinity

One of the most visually intriguing helmets available from KBC Helmets is the silver/gunmetal Infinity KBC FFR modular motorcycle helmet. Totally 3D engineered from the very beginning by an international design team, this DOT approved modular motorcycle helmet model is also the most technically advanced, feature-packed helmet from KBC. The silver/gunmetal Infinity KBC FFR helmet offers a lot of style, features, and panache at a great price.

The outer shell and modular flip-up front of the FFR are injection-molded from high-impact thermoplastic that is shock absorbent and penetration resistant so that it meets or exceeds DOT motorcycle helmet standards. A metal to metal locking system provides a strong, secure latch to make sure the front stays closed in a crash. Simply press a single button located on the bottom front of the chin bar to lift or close the entire flip-up front with one-hand convenience.

The outer shell and modular flip-up front are sanded smooth before several coats of high-gloss premium silver paint are applied. Then the gunmetal graphics are carefully hand-applied. The most outstanding feature of this factory custom motorcycle helmet is the silve stripes, shaded to look like 3D chrome trim pieces. They really pop, providing a lot of eye appeal. Tough clear polyurethane hard coating protects the painted finish and graphics against scratches.

A large window ensures great visibility with unobstructed peripheral vision. The FFR comes standard with a multi-position flip-up ratcheting face shield made of clear optically-correct and shatter resistant 2.2mm molded polycarbonate, treated to resist scratches and fog-ups. The shield moves smoothly and seals tightly against a black rubber trim that forms a lip around the window. A quick removal shield system allows tool less face shield swaps. Besides clear, KBC Helmet shield choices for the FFR modular helmet include light smoke, blue, yellow, iridium silver, and iridium blue.

The fingertip-adjustable air ventilation and cooling system of the triple-vented KBC FFR modular motorcycle helmet works with the internal comfort liner to allow all-around ventilation and airflow for greatest comfort. Air enters the helmet through front chin-bar and forehead vent strategically placed on the frontal surface to maximize air intake. Two exhaust vents at the rear of the helmet help pull hot stale air and moisture out of the helmet, allowing a refreshing airflow.

A deluxe comfort liner with dual-function dual-fabric space-frame design ensures a superb fit and hours of relaxed riding. Panel lining is tailored from soft Duralux microfiber that is both sweat resistant and moisture absorbent. Airnet microfiber netting between liner panels enhance airflow, allowing air to circulate freely through the lining to the inside of the helmet. The result is superior heat and moisture transfer from the rider's head into the airflow around the liner.

With aerodynamic, balanced design, comfortable wear, really hot looks, effortless on and off plus the advantages of a full-face motorcycle helmet, the silver/gunmetal Infinity KBC FFR modular motorcycle helmet has everything one might look for in a lid. This is a modular motorcycle helmet that answers the need for form, function, finish that provides style, and protection.

Click to see other KBC FFR Helmets currently for sale

Click to see KBC FFR Shields currently for sale

KBC FFR Modular Motorcycle Helmet: The Silver/Gunmetal Infinity is a post from: Modular Motorcycle Helmets

Shoei Multitec Modular Helmet WHITE MED    US $434.69

SHOEI MULTITEC MODULAR HELMET MATTE BLACK LARGE    US $389.00

SHOEI MULTITEC BLACK XXL FLIP UP MODULAR HELMET MOTORCYCLE FLIPUP    US $375.00

SHOEI Multitec Motorcycle Flip Up Full Face Helmet WHITE M Medium    US $600.38

Shoei Multitec Modular Motorcycle Helmet

The Shoei Multitec modular motorcycle helmet replaced the Syncrotec in their 2007 lineup. Years of design and input from customer polls culminated in "the pinnacle of flip-up helmet design and technology," as proclaimed by the Japanese manufacturer. The Shoei Multitec modular motorcycle helmet offers several significant improvements over the ousted Syncrotec.

The first obvious improvement provided by the Shoei Multitec modular motorcycle helmet was looks. The outer shell is constructed of fiberglass and is specifically designed for decreased wind resistance and improved aerodynamics with radical style. A rear wind diffuser reduces drag and lift and adds to the aesthetic appeal of the helmet. The all-new — at the time — shell design resulted in less buffering and noise at speed.

The shell shape of this modular motorcycle helmet is designed specifically for each market around the world. For riders in the good old U.S. of A., this means an improved fit for most. The interior shell is dual-density EPS (expanded polystyrene) that helps reduce impacts, improves comfort and minimizes high-speed wobble.

The full-support interior of this modular motorcycle helmet from Shoei features removeable, five-layer cheek pads with cutouts for eyeglasses. Tighter tolerances and rubber inserts between seams allow less turbulence to enter the helmet and greatly reduces noise level. A chin curtain also contributes to a much quieter ride than its predecessor.

In addition to the chin curtain, the Shoei Multitec modular motorcycle helmet offered an chinbar-locking mechanism with an easy-release button that is gloved-hand friendly. The latching mechanism uses metal pins and hooks to prevent the chinbar from opening during an asphalt incursion. EPS in the chinbar provides an additional safety feature.

The Shoei Multitec modular motorcycle helmet is a triple-vented flip-up number. The forehead vent has an adjustable slide shutter that provides controlled air intake through three ports. The chinbar has a larger air intake front vent. A neck outlet in the rear provides an exhaust egress that works with the forehead and chinbar vents to allow air circulation in the helmet for riding comfort.

The Shoei Multitec modular motorcycle helmet face shield provides 100% protection from UVA and UVB rays and is treated with a scratch resistant coating. The Q.R.B.P. (Quick Release Base Plate) allows tool-less shield removal. Overall, this DOT approved modular motorcycle helmet from Shoei is a vast improvement in looks, comfort and construction compared to its predecessor.

Click to see other Shoei Multitec Helmets currently for sale

Click to see Shoei Multitec Shields currently for sale

Shoei Multitec Modular Motorcycle Helmet is a post from: Modular Motorcycle Helmets